Extra-wide vinyl for rail?

[CrazyEyez]

What's the widest anyone has found vinyl? I want to make a 60" circular table, ideally with a seamless rail. But that would require vinyl close to 70" wide. I've only seen it in 54" width.

[TabascoJRC]

my guess is you are going to have to buy length not width and try and sell the rest off to the next guy.

[Fins]

Have you checked out Scott Keen's Forum (http://www.scottkeen.com/forum/viewforum.php?f=7&sid=943328656e55720956e1f76a02b5 c3bf)... seems like this has been covered in a few posts.

Quads mods the forum and his site (http://www.pcpotato.com/poker/) is excellent

- Fins

[smoore]

I saw a repair crew in a casino and they had a big long roll of vinyl about 10in wide. They must form it around somehow. I only saw the material, didn't get to see them do it. I assume a heat gun and lots of stretching/stapling is involved. When I thought about it, the casino tables have a better finish on the rail than any home table I've personally sat.

[ncskiier]

Love your avatar. That show's the best.

[CrazyEyez]

[ QUOTE ]
Have you checked out Scott Keen's Forum (http://www.scottkeen.com/forum/viewforum.php?f=7&sid=943328656e55720956e1f76a02b5 c3bf)... seems like this has been covered in a few posts.

Quads mods the forum and his site (http://www.pcpotato.com/poker/) is excellent

- Fins

[/ QUOTE ]

I have looked there. Great forum. I didn't see anything about wider vinyl but I'll try posting there.
Thanks.

[CrazyEyez]

[ QUOTE ]
my guess is you are going to have to buy length not width and try and sell the rest off to the next guy.

[/ QUOTE ]

Maybe I'm misunderstanding you, but that wouldn't work for what I want. For a 60" diameter table I'd need a piece that is roughly 70x70.
I may have to end up just using two pieces and having seams.

[Riverboat Willie]

If you're going to end up having seams, i'd suggest doing something like my tables. For the tables I have embroidered, i use an extra "patch" over the rail that makes the seam disapear and it adds a nice look. You can take a look at my tables here: Http://viper12873.tripod.com Both my personal table and the green and white customer table make use of this method. Good luck with your table!

Mark "Riverboat Willie" Nelson

[wacki]

[ QUOTE ]
Love your avatar. That show's the best.

[/ QUOTE ]

What show is that?