Another 2001fp question...

ddollevoet · #1 03-31-2005, 10:14 AM

I had my 2001fp delivered yersterday. I hooked it up and it was working fine. I had the screen on my laptop (15')extend to the 2001fp 1600X1200. Everything was working fine. (I had a lobby open on the laptop and 4 tables on the 2001fp.)

I don't know what I did, but now I have a 2 or 3 inch black verticle bar on the left side of the 2001fp. I checked the resolution and it was still set at 1600x1200.

Anybody have a clue how to fix this?

LALDAAS · #2 03-31-2005, 10:58 AM

I would go to the picture setting on the monitor first and adjust the settings might jus have to move the picture to the left.

Ofcourse I am just guessing and stating the obvious asnwer.

jack_of_hearts · #3 03-31-2005, 11:57 AM

Had this happen to me and i moved my monitor to the left and it was fine.

ddollevoet · #4 03-31-2005, 07:32 PM

Nope, that didn't work. Any other sugestions?

Scratch · #5 03-31-2005, 09:16 PM

Go into the on-screen menu (the 2nd button from the right), and choose "Factory Reset". Then, select "Position Settings". See if that helps. Are you using the D-SUB or DVI-D connector?