#1
|
|||
|
|||
Detailed plumbing question
Ok, if anyone knows anything about this, I could really use some help.
I'm replacing the faucet, handle and shower head in a bathtub (I'm also tiling the surround). So, to put the new gear in, I need to replace the plumbing in the wall... the new "distributor" that goes with the new handle, etc. Ok, I got the wall open on both sides, and I cut the old stuff out. Here's how it looks. There are two old supply lines (galvanized pipe, although most of the plumbing in the house is copper). I have a threaded adapter screwed into both, which goes into a length of copper pipe. Then there are elbows which go into two more threaded adapters that go into the "distributor. We dry fit the whole thing, sweated it, and got it all together. Turned on the water... and the 4 threaded connections are leaking! The two from the old galvie to the new copper, and the two from the elbows into the distributor. So, to clarify... all the welds are solid. No leaks to be found. But the threaded connections are pretty much all leaking very, very slightly. I don't know how to fix this. We used teflon tape and wrenched the [censored] out of them, and they're still leaking. Any thoughts as to why this is happning? Could we have heated the teflon tape too much while we were sweating the pipe? Any suggestions on how to fix it? Potentially without having to take the whole thing apart? |
#2
|
|||
|
|||
Re: Detailed plumbing question
I was hoping this would be about pooping. Posts about pooping are more fun.
Swede |
#3
|
|||
|
|||
Re: Detailed plumbing question
I hear duct tape fixes everything.
|
#4
|
|||
|
|||
Re: Detailed plumbing question
Get some vinyl tape at a plumbing supply store, you will have to undo the threaded connections, wrap the tape tightly around the threads, and redo the connections
|
#5
|
|||
|
|||
Re: Detailed plumbing question
[ QUOTE ]
Get some vinyl tape at a plumbing supply store, you will have to undo the threaded connections, wrap the tape tightly around the threads, and redo the connections [/ QUOTE ] So is this vinyl tape better than the teflon tape that we used? |
#6
|
|||
|
|||
Re: Detailed plumbing question
There is a plumbing "glue" that you can use for this. I think it is called pipe dope or something. It comes in a small tube and looks a little like caulk. Works great but you will have to take it apart, spread it evenly on the threads and reassemble.
|
#7
|
|||
|
|||
Re: Detailed plumbing question
[ QUOTE ]
[ QUOTE ] Get some vinyl tape at a plumbing supply store, you will have to undo the threaded connections, wrap the tape tightly around the threads, and redo the connections [/ QUOTE ] So is this vinyl tape better than the teflon tape that we used? [/ QUOTE ] Some brands are labeled 'plumbers tape'. Whatever that stuff is is the right stuff to use. It's always worked for me. |
#8
|
|||
|
|||
Re: Detailed plumbing question
[ QUOTE ]
[ QUOTE ] Get some vinyl tape at a plumbing supply store, you will have to undo the threaded connections, wrap the tape tightly around the threads, and redo the connections [/ QUOTE ] So is this vinyl tape better than the teflon tape that we used? [/ QUOTE ] Oh, I wasn't aware you used any tape. They work about equally as well in my experience. |
#9
|
|||
|
|||
Re: Detailed plumbing question
oops, it was in the OP, my baad
|
#10
|
|||
|
|||
Re: Detailed plumbing question
The pipe dope is correct, make sure it is the correct kind. For joining copper to cooper, plastic to copper,galvanized to copper, etc.
As everyone else said though, you are going to have to dismantle it. |
|
|