Two Plus Two Older Archives  

Go Back   Two Plus Two Older Archives > General Gambling > Probability

Reply
 
Thread Tools Display Modes
  #1  
Old 08-14-2002, 11:56 AM
Guest
 
Posts: n/a
Default geometric mean and velocities



I just noticed irchans question way down below about whether there is an application of the geometric mean to speeds. I found that the geometric mean gets involved if we consider the average speed for two different accelerations.


Consider accelerating from a standstill:


distance = acceleration * time^2

d = at^2


accelerate over distance d twice:


avg. speed = 2d/[sqrt(d/a1) + sqrt(d/a2)]


= sqrt(d)sqrt(a1a1)/[sqrt(a1)+sqrt(a2)]/2


For example if we start from a standstill and accelerate at 6 mph/sec for a mile, and then do it again at 4 mph/sec, the average speed from the above formula will be 132 mph. If you plug 6 and 4 into the above forumlas, you have to multipy the result by sqrt(3600) to convert seconds to hours.
Reply With Quote
  #2  
Old 08-14-2002, 12:00 PM
Guest
 
Posts: n/a
Default Re: geometric mean and velocities



That should be


sqrt(d)sqrt(a1a2)/[sqrt(a1)+sqrt(a2)]/2


Screwed up the punch line.
Reply With Quote
  #3  
Old 08-14-2002, 02:17 PM
Guest
 
Posts: n/a
Default correction



I'm missing a factor of 1/2


d = (1/2)at^2


since v = at and d = integral[(at)dt]


so the final equation is:


avg. speed =


2sqrt(2d)sqrt(a1a2)/[sqrt(a1)+sqrt(a2)]


My example of 6 mph/sec and 4 mph/sec for a mile gives an average speed of 187 mph.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:29 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.