Custom King's Crown Group Buy

[warewulf]

Dark blue on the $1 chips. Not so sure on the edge spot colors, but not bad at all!

[Slow Play Ray]

Yes warewulf, I agree this looks much better:

[PinataUT]

Nice job.

Consider something like this one dollar chip (as pictured above but with a double-wide light blue at top and bottom and a double-wide white at left and right).


By using this inlay one could draw from these chips for other denominations or to replaces ones in the custom set that someone really didn't like as much as the 'stock' ones offered by TR King or Apache.



From TR KING $.90 per chip (e.g. if you wanted the white 4 1/8" brown for your $1 instead of the one from the custom set or if you wanted to add a $5k or $10k edgespot chip)


From Apache Pokerchips $.87 each (e.g. if you really wanted a plain white chip or a few $10,000)

[Slow Play Ray]

Yeah, I like the way that looks. I will have to give Dennis a call and see if this type of edge spot is an option at the same price. Maybe do it with both (all) lower-denom chips?

[warewulf]

Maybe even the moon inserts for one of the chips?

[Slow Play Ray]

[ QUOTE ]
Maybe even the moon inserts for one of the chips?

[/ QUOTE ]

I'm fairly certain changing the edge spot shape will rasie the price. But if not, I am definitely willing to mix it up a little. I will check with Dennis tomorrow and get back to you.

[PinataUT]

I'm pretty sure that you can do the $1 I proposed for the same price as the other 4*2 chips. These are just white-white, blue-blue, white-white.

If you're going to do $1 and $5 different than the others, might I suggest that you leave off the white spots on the $1 (so it will have dark blue chip with light blue at 12 and 6... Dennis would fill in the 3 and 9 inserts with dark blue). I'm 99.44% sure this would work out and look ok (e.g. insert composition and chip composition are the same, right?).

[PinataUT]

I'm not crazy about the moons, in general. But mock-ups might make that easier.

Also: any chance to do a single non-denominated chip people could use for fill-ins as a $2.50 or $1,000?

I don't think you're going to have a problem hitting 5k on this order.

[Slow Play Ray]

[ QUOTE ]
I'm pretty sure that you can do the $1 I proposed for the same price as the other 4*2 chips. These are just white-white, blue-blue, white-white.

[/ QUOTE ]

Yes, I agree. I was only referring to the half-moon for the price increase. And if we were able to use the half-moon, I would only want to use it on one chip - either the smallest denom or the highest.

[ QUOTE ]
If you're going to do $1 and $5 different than the others, might I suggest that you leave off the white spots on the $1 (so it will have dark blue chip with light blue at 12 and 6... Dennis would fill in the 3 and 9 inserts with dark blue). I'm 99.44% sure this would work out and look ok (e.g. insert composition and chip composition are the same, right?).

[/ QUOTE ]

Yes, I am sure they could probably do this as well. I will hopefully clear all these issues up tomorrow. You mean this?



[ QUOTE ]
Also: any chance to do a single non-denominated chip people could use for fill-ins as a $2.50 or $1,000?

[/ QUOTE ]

Absolutely. I think this is a great idea. Color suggestions? Maybe gray? Or orange?

[ QUOTE ]
I don't think you're going to have a problem hitting 5k on this order.

[/ QUOTE ]

I hope you're right!

[paulsonchips]

Also ask Dennis if thier racks will fit the TRKINGS flush. He sells the racks for 5.00 each. I think its worth it if the chips will fit flush.

The normal racks out there do not fit the kings well. They wobble a lot. Especially when you have 4 or 5 of them stacked up together.