Two Plus Two Older Archives

Two Plus Two Older Archives (http://archives2.twoplustwo.com/index.php)
-   Computer Technical Help (http://archives2.twoplustwo.com/forumdisplay.php?f=46)
-   -   Burning DVDs (http://archives2.twoplustwo.com/showthread.php?t=358466)

JihadOnTheRiver 10-15-2005 08:09 PM

Burning DVDs
 
I'm pretty ignorant when it comes to computers these days. After college I just stopped paying attention or making any real research efforts into software. I recently got a top of the line laptop (desktop replacement type) that has a DVD burner. All I really want to do is use it for backup purposes (read: porn/music storage). Burning CDs is easy, but only for music purposes.

What software to I need to put data files onto CDs or DVDs? I know this should be easy, but I'm functionally retarded at times. Also, if anybody has any good recommendations regarding DVD movie ripping/burning software, I would appreciate it. I'd love to turn my house into Blockbuster for $10.99 a month.

-Jihad

ghostface 10-16-2005 10:07 PM

Re: Burning DVDs
 
DVDxCopy...works like a charm. First it copies the DVD to the hard drive then you put inthe blank disk andit copies it to the disk. Make sure you buy DVD-RWs, not -R's, +R's, or +RW's.

Nomad84 10-16-2005 10:18 PM

Re: Burning DVDs
 
[ QUOTE ]
Make sure you buy DVD-RWs, not -R's, +R's, or +RW's.

[/ QUOTE ]

Any reason in particular? I thought that would depend on your DVD player more than anything else. Is that incorrect?

10-16-2005 10:36 PM

Re: Burning DVDs
 
Most software that burns data to your cd burner should work with your dvd burner. I sujest Nero for its functionality and ease of use. If your looking to burn dvd movies (from any file format) I sujest DVD santa for its ease of use and simplicity.

ghostface 10-16-2005 11:42 PM

Re: Burning DVDs
 
DVDxCopy is only good for copying DVDs from disc to disc. You use -RW's because if there are any errors during the burn process you can reuse the disc instead of throwing $1.50 out the window with an -/+R. It seems that most DVD players will accept -RW where some will not accept +RWs. I know one of the reasons I went with -RW instead of + is that PS2 will play movies on -RWs.

Nomad84 10-17-2005 02:08 PM

Re: Burning DVDs
 
[ QUOTE ]
You use -RW's because if there are any errors during the burn process you can reuse the disc instead of throwing $1.50 out the window with an -/+R.

[/ QUOTE ]

I know I've seen -R discs for around $.35-.40 each, but for all I know, they may not be worth using anyway. If errors are common, then I can definitely see your point. I also use a PS2 most of the timefor DVDs, so I'll definitely keep that in mind when I get a burner. I think that an xbox will read non RW media though, so I may use it. I think you can also mod it to run in progressive scan mode, but that's something I'll look into more later.

AlexHoops 10-25-2005 01:11 PM

Re: Burning DVDs
 
What do you guys think of DVD shrink. On the website it mentioned that it could burn DVD-Rs but didn't mention DVD-RWs. Can it do those too?

Also, my DVD burner is capable of dual layer writing. I don't know exactly what that means. To the best of my understanding it can burn twice as much data to a disk... Is this true? What program can help me utilize this to the fullest and give me the highest quality copy?

Pyromaniac 10-25-2005 02:43 PM

Re: Burning DVDs
 
generally speaking, what you can burn to depends on your *hardware*, not the software. The software will burn to whatever your drive will burn to. Common DVD burners are

* DVD-R, which will also burn to DVD-RW
* DVD+R, which will also burn to DVD+RW
* DVD+/-R, which will burn to any of the above

For you to burn dual layer, you need to use a dual layer disk. It won't burn dual layer on a regular/non-dual layer disk. Those are currently more expensive, a couple bucks a pop I guess, as compared to say 40 cents apiece on DVD-R or DVD+R discs.

AlexHoops 10-25-2005 03:24 PM

Re: Burning DVDs
 
I just checked... I have a DVD+RW burner. Is the video quality noticably better when the dual write capability is used?

10-25-2005 03:41 PM

Re: Burning DVDs
 
[ QUOTE ]
I just checked... I have a DVD+RW burner. Is the video quality noticably better when the dual write capability is used?

[/ QUOTE ]

If I remember correctly, DVD+RW refers to the format of DVD that you may use. Your burner supports + (as oppossed to -) format DVDs, and will write to either DVD+R or DVD+RW. The RW format allows you use rewritable discs. If you're burning movies, or anything you don't plan on erasing later, save yourself $ and go with the +R format.

The quality of dual layer burning is better, but single layer discs (about 4.7 gigs) is not bad. You may not even notice with an older TV. If my memory serves, a dual layer disc will hold about 8.5 gigs; I don't think this will hold an entire movie.

I use DVD Shrink. It works well. Remember that you need to have Nero (or perhaps some other burning engine) installed for its burning qualities to function.

Hope this helps, and that I am not too far off.

Go to http://www.doom9.org/ for more thorough, accurate information. Check "The Basics" section.

AlexHoops 10-25-2005 06:57 PM

Re: Burning DVDs
 
If dual layer discs don't hold a full movie, how are actual DVD movies made?

I just checked and a movie I ripped earlier is around 6.5 gigs . In this situation would the movie need to be shrunk or could it just be copied as is?

10-25-2005 07:18 PM

Re: Burning DVDs
 
[ QUOTE ]
If dual layer discs don't hold a full movie, how are actual DVD movies made?

I just checked and a movie I ripped earlier is around 6.5 gigs . In this situation would the movie need to be shrunk or could it just be copied as is?

[/ QUOTE ]


I could be wrong about the upper ceiling on dual layer discs and studio-burnt DVDs. 8.5 gigs may be the max for any DVD, home- or studio-burnt. A quick search suggest 8.5 is about the max.

Remember, different movies will be different sizes. It depends on length, extras and the like. Some will come in under 4.7 gigs, some at 7 gigs+, or around 6.5 like yours.

As to your question: that depends. If your burner is dual layer, you can simply burn. If single layer, then you'll need to shrink. As mentioned elsewhere in this thread, DVD Shrink will do the job (this program will also allow you to remove unwanted options, like commercials, commentary, etc.).

I suspect that you've already decrypted the ripped files. If not, you need to do this. Check out DVD Decrytper. Both this and DVD Shrink are free.

Aytumious 10-25-2005 09:09 PM

Re: Burning DVDs
 
Google DVD Shrink and DVD Decrypter.

AlexHoops 10-25-2005 09:25 PM

Re: Burning DVDs
 
Yeah I have both of those programs. I was just trying to get an Idea of the difference in quality of DL and standard DVD+RWs

mikeyvegas 10-26-2005 02:56 AM

Re: Burning DVDs
 
[ QUOTE ]
Google DVD Shrink and DVD Decrypter.

[/ QUOTE ]

This was exactly what I was going to say.

steelcmg 10-26-2005 12:06 PM

Re: Burning DVDs
 
This is a very good site to learn about burning dvds it answered all of my questions http://www.videohelp.com/guides.

And also dvdshrinks site has a awesome faqs list
http://forum.digital-digest.com/showthread.php?t=48762


All times are GMT -4. The time now is 12:27 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.