NEWS FLASH. NEW PAULSON MOLD IMMINENT
 

I'm told again today, that we were given wrong information. The new word from Trademark Poker is that the new Paulson chips will have a NEW MOLD, not a bigger inlay. Here is the quote:

[ QUOTE ]
First, I gave you some wrong information. We are having the mold changed and not increasing the size of the inlay. We are having the mold redone to accomodate the inlay not increase the size of the inlayt.

[/ QUOTE ]

New mold, bigger inlay, I don't care. As long as it's one or the other.

Ten

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

This seems kind of crazy. Isn't it easier to put in the bigger inlay than retool the die for the chips?

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

[ QUOTE ]
Isn't it easier to put in the bigger inlay than retool the die for the chips?

[/ QUOTE ]

You would think so, but there seems to be no logic to the things Paulson does...

J5

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

[ QUOTE ]
This seems kind of crazy. Isn't it easier to put in the bigger inlay than retool the die for the chips?

[/ QUOTE ]

Damn the tire is flat. Time for a new car.

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

Actually, I was kinda excited for the bigger inlay to fill all the space the had around samples like the James Bond chip.

Also, I'd prefer them to take "paulson chips" off the outside and just have the H&C. IF they want to be different than casinos, just have 4 at each end North South East West.

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

Oh.. and just to be an ass it is imminent. [img]/images/graemlins/tongue.gif[/img]

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

[ QUOTE ]
This seems kind of crazy. Isn't it easier to put in the bigger inlay than retool the die for the chips?

[/ QUOTE ]

This goes back to my original theory (once the JB's came out) that NO ONE seemed to agree with. My theory is that the most important thing to Paulson is that the only inlay allowed on the home market is the STANDARD (small) size. They are making a new mold because they understand that it looks a little funny having a small inlay with all that empty space left before the edge of the texture starts.

I have believed that they will be making a new mold since day one. I got completely slammed on TH-P.com about my theory being wrong. Only yesterday was I convinced I was wrong when I heard from TWO sources that they will be allowing a grand inlay, and no mold change. Then today, a flip-flop.

I guess we'll know once we see the photos, right? Either way, we're ordering these chips.

Ten

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

Hey hey!
Fantastic news!
(I just hope they use the concentric circles per your recent mock up)
I was actually a bit disappointed with the news of a Grand Inlay. Inlay shapes are nice, but shaped Grands would be, well... kinda unusual.
As far as I'm concerned, things are just perfect so far!
Let's take the time and do this right.
Gimme concentric circles! (and white $1 chips)

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

Definitely.

The older H&C chips with the standard inlay have a concentric circle groove (albeit outboard of the H&Cs), and I think it definitely is a positive addition to the mold.

And, I'm with you, Ten. Whichever way it comes, I'm buying.

(But I still kinda liked your artwork better with the backgrounds.)

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

ok, i am a retard..

what are concentric circles?

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

[ QUOTE ]
Also, I'd prefer them to take "paulson chips" off the outside and just have the H&C.

[/ QUOTE ]

I agree although I wouldn't mind "Paulson" being on the chip. It just seems idiotic to have "Paulson Chips". Any damn idiot can see that it's a chip. That's like Chevy putting "Chevrolet Car" on the back of their vehicles.

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

[ QUOTE ]
That's like Chevy putting "Chevrolet Car" on the back of their vehicles.

[/ QUOTE ]

ahahahahaha! It's only funny because it's true. Stupid Paulson, they make some really quirky decisions.

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

This mold has concentric circles
http://lightningsolutions.net/images/chips/big/red.jpg
This mold has none
http://lightningsolutions.net/images.../big/black.jpg

Re: NEWS FLASH. NEW PAULSON MOLD IMMINENT
 

This is odd, as the new mold (as imagined) will require them to ADD material to the die (since the mold is a negative of the chip)...being a design engineer who has gone through this before, I know this to be costly and highly undesirable, especially in a high-capcity, multi-cavity mold as they are surely using. Seems odd to me? Unless the actual chips look different than the pictures, I have not got samples yet.

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

[ QUOTE ]
Oh.. and just to be an ass it is imminent. [img]/images/graemlins/tongue.gif[/img]

[/ QUOTE ]

I spelled it right in my original post, I wonder why everyone else spelled it wrong in their replies? [img]/images/graemlins/confused.gif[/img] [img]/images/graemlins/confused.gif[/img]

Ten

[img]/images/graemlins/tongue.gif[/img] [img]/images/graemlins/tongue.gif[/img]

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

oh wow.

YES concentric circle please!

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

[ QUOTE ]
oh wow.

YES concentric circle please!

[/ QUOTE ]

Keep dreaming. [img]/images/graemlins/tongue.gif[/img]

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

Could some please explain to me the concentric circles? I cannot see a difference in these two molds. Am i blind?

-m

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

[ QUOTE ]
Could some please explain to me the concentric circles? I cannot see a difference in these two molds. Am i blind?

-m

[/ QUOTE ]

he changed the picture, they both have them now - the two indented circles in the mold of the chip.

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

[ QUOTE ]
Could some please explain to me the concentric circles? I cannot see a difference in these two molds. Am i blind?

-m

[/ QUOTE ]

i changed out the photos. those two ringed indentions were not present in the older photos.

ten

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

in reality its just one circle on the outside added. the inner circle is there because of the recess for the inlay, as it is in all chips.

btw, do we really need Cairo at the bottom? i would much rather see the eagle moved down and Cairo removed, it would look better imo. and, the name Cairo wanst used in ancient times.

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

[ QUOTE ]
and, the name Cairo wanst used in ancient times.

[/ QUOTE ]

nor did they play poker...;)

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

[ QUOTE ]
in reality its just one circle on the outside added. the inner circle is there because of the recess for the inlay, as it is in all chips.

[/ QUOTE ]

Actually there are two circles. We may not have done it very well, but the inner circle is meant to be a seperate ring from the inlay edge.


[ QUOTE ]
btw, do we really need Cairo at the bottom? i would much rather see the eagle moved down and Cairo removed, it would look better imo. and, the name Cairo wanst used in ancient times.

[/ QUOTE ]

I built this set to resemble the classic design of a real casino, albeit with a bit more flair. Most classic inlays that you see have the casino name prominant somehere at the center or top. They have a small simple logo, and the denomination. Then they almost always have the location at the bottom. I thought it would be best this way.

Ten

Re: NEWS FLASH. NEW PAULSON MOLD EMINANT
 

Two or more circles of (optionally) different sizes with the same center points are concentric.

Re: NEWS FLASH. NEW PAULSON MOLD IMMINENT
 

Wow, who would have thought those 2 circles would have made all the difference... I'm blown away. If the actual chips are like the mockup it would be awesome.

Re: NEWS FLASH. NEW PAULSON MOLD IMMINENT
 

is it possible that paulson already had these dies (the new ones) manufactured?

Re: NEWS FLASH. NEW PAULSON MOLD IMMINENT
 

[ QUOTE ]
is it possible that paulson already had these dies (the new ones) manufactured?

[/ QUOTE ]

Anything is possible...but I don't see how it would have slowed down the order if this was the case...they obviously must be changing something in the process...

Re: NEWS FLASH. NEW PAULSON MOLD IMMINENT
 

I'm pretty sure the pictures of the molds that Ten is using are modified versions of the James Bond Paulson pics. Ten (or one of his artists) just made the outer rim bigger based on what Trademark says the new mold will look like. He didn't add the concentric circles until a couple days ago. No one knows for sure what the new mold looks like, but it's very unlikely they'll have the concentric circles. Feel free to correct me if I'm wrong...

Re: NEWS FLASH. NEW PAULSON MOLD IMMINENT
 

[ QUOTE ]
I'm pretty sure the pictures of the molds that Ten is using are modified versions of the James Bond Paulson pics. Ten (or one of his artists) just made the outer rim bigger based on what Trademark says the new mold will look like. He didn't add the concentric circles until a couple days ago. No one knows for sure what the new mold looks like, but it's very unlikely they'll have the concentric circles. Feel free to correct me if I'm wrong...

[/ QUOTE ]

you're not wrong, this is all correct.

Ten

Re: NEWS FLASH. NEW PAULSON MOLD IMMINENT
 

to validate my point...
http://i13.ebayimg.com/01/i/03/74/77/dd_1_b.JPG

here's another...
http://img11.exs.cx/img11/1354/pyramid8qp.jpg

Re: NEWS FLASH. NEW PAULSON MOLD IMMINENT
 

yea, you might be right. I guess it'd be best to ask the artist who mocked that up, Johnny5.

Ten


doh! now you know who is behind all these wonderful Pharaoh's Club designs! [img]/images/graemlins/grin.gif[/img] [img]/images/graemlins/grin.gif[/img]

Re: NEWS FLASH. NEW PAULSON MOLD IMMINENT
 

Yes, the concentric circles are a key part of the standard Paulson Top Hat & Cane mold, as shown by duma above (if that's what they're using as the basis for the "new" home mold).

To me, the concentric circles add a classy look to chips, and they also IMO improve the feel and the stackability. Some of the classic chip designs have/had circles etched in the mold.

Here are a few samples (pardon the picture quality) --

#3 is the traditional Paulson TH&C, standard inlay size (and even scalloped!)
#2 is a traditional Horsehead (ASM) -- one of the best molds ever
#4 is the NJ Martini Club, which doesn't have a complete circle but still feels good
and #1 is the All-In Chip that most people hate, but they have two terrific circles that make this feel pretty good

Edit: TEMPORARY IMAGE HOST PROBLEM -- PICTURE WILL BE BACK SOON

http://img.villagephotos.com/p/2005-...centric-4a.jpg

- - tomb
New Orleans
Birthplace of Poker

Re: NEWS FLASH. NEW PAULSON MOLD IMMINENT
 

Duma,

I'm not sure that those pics validate your point, as 1 is hot stamped, and the other has a shaped inlay. I don't have any standard inlay old style/casino Paulson handy & the grand/giant chip molds are different, but it is my understanding that there are actually 2 concentric circles, not 1 as you stated.

Can anyone confirm this?

The style of the circles was based primarily on these pics of the old Paulson JBs:

http://img169.exs.cx/img169/4403/cdic25cl12qm.jpg
http://img169.exs.cx/img169/8162/cdic5tex13rm.jpg
http://img144.exs.cx/img144/8792/cdic25tex18jj.jpg
http://img46.exs.cx/img46/4206/hc12vb.jpg

I think the new mockups reflect this fairly well, regardless whether the inner circle is a distinct channel like the outer circle, or if it is just the start of the inlay recessed area.

Note: The circles are not likely to appear on the Paulson home chips anyway, but we can hope!

J5

Re: NEWS FLASH. NEW PAULSON MOLD IMMINENT
 

ya those bonds look to not have a recessed center. but on chips that do, its just one outer circle, as u can see in the pics. my guess is that the new paulson mold will have a recessed center.